” After updating to iOS 14, why is my iPhone speaker not working during/during calls? Follow this guide to learn some practical and simple methods for resolving the issue on your iPhone.”
I recently updated my iPhone 7 to iOS 14. I am no longer able to utilise Bluetooth or the speaker when on the phone. I’ve tried starting phone calls on speaker or Bluetooth and then switching to speaker or Bluetooth during the call, but it will never switch. Fortunately, my headphones work well, although they fall short of meeting all of my requirements. How do I make these work properly?
Even though iOS 14 is the latest version, iOS updates often introduce difficulties and bugs in addition to new features and improvements. As a result, it is conceivable that you will encounter an iPhone speaker not working issue following the iOS 14 update.
Typically, an iPhone speaker that is not working is caused by one of two things: software problems or hardware damage. Additionally, it does so on iOS 14. If it’s a hardware issue, you’ll need to visit an Apple retail shop or an online phone repair service; but, if it’s a software issue, you can try the following basic techniques to resolve it. Additionally, it will assist you in determining whether the issue is hardware or software-related. Examine them immediately.
1. Inspect the ring/silent switch
This is a simple tip that is frequently overlooked. Please ensure that your iPhone’s ringer is turned on. Otherwise, your device will be silent, regardless of whether it is an iPhone 7 or another iPhone model.
2. Ensure that the iPhone’s volume is not too low
If your iPhone’s volume is set too low, you may be unable to hear audio output from your speakers. It’s simple and ubiquitous to mistakenly toggle the mute switch or turn the volume all the way down on your iPhone. Therefore, increase the volume on your iPhone to the maximum setting.
3. Ensure that your iPhone is not in Headphones Mode
Another possible explanation for the iPhone speakerphone not working is a problem with the headphones mode. If your Lightning (charging) port is clogged with grease, lint, or other debris, your iPhone will remain in headphones mode indefinitely, even if no headphones are plugged in. If your iPhone believes you’ve connected in headphones, audio will not be transmitted through the speakers. To resolve such a scenario, use the following steps:
Step 1. On your iPhone’s left side, press the volume buttons. If the pop-up message reads Headphones, your iPhone is in headphones mode.
Step 2. Inspect your Lightning port or headphone jack with a flashlight for lint, sludge, or any other debris.
Step 3. If you notice anything trapped in your Lightning port, use an anti-static brush or a new toothbrush to remove it.
4. Verify That the iPhone Sound is Playing Via Other Means
This method involves determining whether the iPhone is linked to other third-party output hardware and whether iPhone sound is being played through devices other than the iPhone, such as Bluetooth or Airplay. To inspect and deactivate them, follow these steps:
Step 1. Swipe up from the bottom of the iPhone screen to access Control Center.
Step 2. If Bluetooth is turned on, turn it off.
Step 3. Tap the AirPlay icon and select Disable AirPlay Mirroring.
5. Reboot Your iPhone
Restarting the iPhone is the simplest way to resolve a variety of iOS difficulties, including the iPhone speaker not working. The methods for restarting an iPhone vary according to the iPhone generation.
If you’re using an iPhone, restart the device by pressing the volume down and power on/off buttons simultaneously. If you’re using an older iPhone model, such as an iPhone 6s/6/5s, hold down the power on/off and home buttons for ten seconds to restart your device.
6. Restore Your iPhone Using the DFU Mode
Additionally, the DFU approach is a practical solution for resolving software issues. To use this approach, simply follow these steps:
Step 1: Connect your iPhone to your computer > Launch iTunes.
Step 2: On an iPhone, simultaneously press and hold the power and volume down buttons; on an iPhone 6s/6 or older, simultaneously press and hold the Home and power buttons.
Step 3: When iTunes reads “iTunes has detected an iPhone in recovery mode,” let go of the power button but maintain holding the volume down or Home button.
Step 4: If you successfully entered DFU mode, your iPhone’s display will go entirely dark.
If it is not, repeat the process from the beginning.
Step 5: Using iTunes, restore your iPhone.
7. Visit an Apple Store for Repairs
If none of the six techniques above resolves your iPhone speaker not working issue, you should consider whether the issue is due to hardware damage and seek assistance from Apple’s official store. Alternatively, you can contact a local phone repair service, such as Puls’s Los Angeles iPhone repair service, which also operates in other cities and employs a large number of technicians.
Bonus Tip: Unstick iPhone Volume Buttons
If your volume buttons are stuck and the volume is not working at all, we recommend using an iOS system recovery programme called AnyFix.
With AnyFix, you can resurrect your Apple devices from 130+ iOS/iPadOS/tvOS system difficulties, such as iPhone/iPad/iPod touch/Apple TV stuck on issues, won’t power on/restart, disabled/boot loop, and so on. And three repair options enable you to acquire the maximum success rate in mending. Besides, it allows you to enter/exit recovery mode with 1-click if you require it.
- Best 5G Smartphones Under 15000
- 5 Big Samsung Smartphone Problems that Users are Facing
- Is Galaxy F23 Worth or Not? FAQs
- Which iPhone to Buy or Avoid Right Now
- Galaxy M33 Vs Galaxy F23 | Which is Worth Buying?